Be Notified when Eagle, Globe and Achor (right) 12"" White Silhouette Decal is back in stock

Enter your email address below to receive a notification when this product is back in stock

Eagle, Globe and Achor (right) 12"" White Silhouette Decal

Item # D1024

                        
                                                                        
                            
							

Availability: In stock

12" white Eagle Globe and Anchor with clear background. This is a right facing emblem intended for outside application.
9.99
$9.99

Quick Overview

12" white Eagle Globe and Anchor with clear background. This is a right facing emblem intended for outside application.

Additional Information
For Best Application:

Items Needed:



-Decal -Squeegee (you can also use a credit card, drivers license or something similar) -Window cleaner (Windex, or rubbing alcohol) -Spray bottle with warm water and a few drops of liquid dishwashing soap -Pin or needle


Step 1:


Clean the surface area where the decal is to be applied with the glass cleaner or rubbing alcohol. It is best to apply decals using this method at temperatures between 45 – 80 degrees.


Step 2:


Lightly spray the glass surface where the decal will be mounted with the mixture of water and liquid dishwashing soap.


Step 3:


Carefully lift the paper off of the back of the decal and place it on the glass where you want it. The idea here is to have the glass wet enough that the decal will slide on the glass until you get it placed where you want it. Once it is in place, hold the top of the decal and starting from the top, using the squeegee or similar instrument, work toward the outside edges and squeegee all of the air bubbles out of the decal. Once it is in place and the air bubbles are all out, just leave it alone and let it dry. If you have a stubborn air bubble that won’t squeegee out, while it is still wet, put a couple of holes in it with the pin or needle listed above. Then squeegee it again until the air bubble disappears. If the decal has been placed on a vehicle, allow the decal to dry before driving it. After it is dry, wash the area around the decal with the window cleaner. Your decal is in place and will stay even if you take it through a car wash.
Related Items
Reviews

Latest Customer Reviews  |  All Reviews

1 Review(s)

Decal Review by David
Overall

I gave it 4 stars due to the difficulty in applying it. Otherwise I am very pleased with this product.

A word of caution when installing.

1) Install with a buddy!
2) Be sure and have the window squeaky clean!
3) Using masking tape, tape off the border to ensure decal is squarely in position. (A crooked detail is not befitting a Marine vehicle!)
3) Have buddy help hold the decal as you apply it.
4) You get one chance at this Marine! If the decal isn't applied correctly bubbling will occur, and if you have to pull it back to correct it will leave white stretch marks on the decal. Ultimately making it look terrible.

Note:
I picked up the white back ground decal that was left facing and installed it on the exterior of my truck with a tinted window. It really popped out nicely; however, the square plastic border showed up as well. If this bothers you, as it did me, I would recommend the right facing decal that you then install from the interior of the vehicle. The plastic square tape it is printed on is less noticeable.

I have tinted windows so I went with the white, and it was perfect. This black color will be great for an interior application without any tinting.

(Posted on 5/20/11)

Write Your Own Review

Ask a Question